Thanks for your help Don and your suggestion on the mods. I had made the crystal and toroid mods but didn't think of the other components in the mod kits.
Jim / W1FMR On Wed, May 22, 2019, 8:47 AM Don Wilhelm <donw...@embarqmail.com> wrote: > Jim, > > It is likely to work OK even with the reduced PLL range. > If you want to correct it and gain some temperature stability for your > K2 at the same time, add the BFO upgrade modification - get BFOMDKT from > Elecraft. > > That kit contains a new PLL crystal as well as parts for the BFO. > > You can see older posts at Nabble. > > 73, > Don W3FPR > > On 5/22/2019 12:25 AM, Jimithy66 wrote: > > I am building an older QRP K2 kit ser. # 2438 Ver. A in > > the Alignment and test section Part 11. pg. 57, the > > PLL Ref. Oscillator Range Test is out of limits. > > > > The Reference High and Low frequencies are OK with > > readings (12100.53 high and 12089.43 low) with range > > limits of 11.5 - 25 KHz but it is low, 11.1 KHz. > > Is this a problem ? > > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html