My 40 and 20 meter K1 has developed intermittent frequency instability and sometimes complete loss of ability to tune (frequency display jumps and stays on 68.0 nominal on 40 and 63.0 nominal on 20). Lightly “mechanically agitating” the circuit board just behind the front panel will bring it back into stable operation, but any sort of movement (I run it QRP mobile in a Tacoma 4x4) will throw it out of whack again. Three modes - normal stable, squiggly unstable, and locked at nominal 68 or 63 above 7.0 or 14.0 as noted above. Seems like a bad solder joint or solder whisker somewhere. Any suggestions on where to look? K1 S/N 0291.
Chris, AJ1G Stonington CT from my iPhone ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com