Hi Joe:
The PWR Slider in WSJT-X is at the top which is full power.
All Audio Levels in Windows 10 Control Panel are set at 75%.
The Line setting (Mic Gain) is now set at Line 60. That will give me 27w
output on the K3S when I have it set for that power level, however I am
not seeing 4 bars on the K3S ALC Meter, all I can get is 3 Bars with
basically every audio level cranked up in the K3S and Windows 10.
The TX Pot on the MK2 is set at 12:00, I have moved the TX Pot to about
14:30 position and with the K3S Line set at 20, I get 4 Bars steady and
the 5th flickering on the ALC Meter.
I have changed the Default device under the Recording Pane in the
Control Panel from Line (MicroHAM Codec) to What U Hear (Soundblaster as
you suggested) and in the Playback Pane I have left Speakers
(Soundblaster as the Default).
Basically I can see is I have changed the TX Audio Pot on the MK2 and it
has solved my problem. I am not sure why things got messed up up it
appears that things are back to what I would call normal. I will go
inside and redo the the levels. I am not sure if I did that when i went
from the K3 to the K3S, but will check it out.
Thanks very much Joe for taking the time to sort me out. You have a
great 4th of July weekend.
--
*73 De Mike*
*VE3YF
_/http://www.ve3yf.com/_*
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com
