Yes, I believe I was pressing the buttons correctly. Very curiously, the "Spot" macro (swt42;) is now functioning correctly; I am convinced I have changed nothing to make that happen. Commands for the P3 (#QSY1; etc) however are still not working...
Peter M0RYB j...@kk9a.com wrote > Are you pressing the K-POD buttons property (tap or hold) for the > functions that you have programmed? I prefer to put most programs as a > tap. > > John KK9A > > > Peter Lock M0RYB wrote > > Good day > I am trying to use the buttons on the K-Pod to run macros. I have used > the > K3 Utility Command tester to store the macro (in this case swt42;) and > edited the MACRO15 label to SPOT. So a tap of the F7 button on the K-Pod > should tune the rig to the signal (CWT on, signal is close enough). I have > written the macros to the K3, and confirmed they are there by erasing them > in the macro editor, and reading them back from the K3. Running the macro > from the Command tester works as expected. > > Tapping F7 on the K-Pod gets the macro label appearing in the VFO B area > and > a 'bip' from the K-Pod, but no evidence that the swt42; is being actioned; > nothing happens to the rig. > > Although this is perhaps a simplistic example, it demonstrates the > problem. > I did find I was able to get the F7 button on the K-Pod to work by > programming Function 7 through the CONFIG:MACRO menu option and assigning > a > tap of the SPOT button to that Function. However, I want to go on to > control the P3 by using its macro commands (#QSY1; and #QSY0;), which as > far > as I am aware, cannot be assigned through the CONFIG:MACRO options. > (Testing > the #QSY1; and #QSY0; commands from the Command tester works just as I > wish). > > Firmware in both the K3 and K-Pod updated today (9th July 2019). > > I guess I have overlooked something simple. > > Any advice would be appreciated. > > Peter > M0RYB > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto: > Elecraft@.qth > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to > lists+1215531472858-365791@.nabble -- Sent from: http://elecraft.365791.n2.nabble.com/ ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com