There are numerous AGC adjustments available in the CONFIG
menu. You can probably find something to suit you there.
73, Ken K3IU
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
On 7/19/2019 4:14 AM, Roger wrote:
Hi,
when operating the K3S in CW mode I found there is no difference in
switching between AGC-F(ast) and AGC-S(slow). It seems the "default" setting
is on slow and does not go to fast (compared to the decay characteristic in
SSB).
The manual explains that the AGC Fast/Slow response should also be effective
in CW.
Can anyone confirm this behavior (or not)?
Firmware version is 5.66 (actually supposed to be 5.67 with the "label" of
the previous version).
73/Roger - DL5RBW
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to kenk...@cox.net
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com
