Although I was unable to exactly determine the source of failure, by using the Restore K3 Configuration button and use a previously saved file, brought the receiver back to life- thankfully! Tweaking those tmp connectors helped as well.
Wish I was able to get a better picture on what happened- like so many things in life, sometimes you reboot and move on ..... Thanks for all the helpful suggestions here! Regards, Mark, K1RX > On Jul 27, 2019, at 12:27 AM, Mark Musick <markmus...@outlook.com> wrote: > > Mark, > Check to make sure the NR and NB are off. > Also, open the K3 utility and check the roofing filter settings. > Does the lack of receiver noise occur regardless of which roofing filter is > engaged? > The narrower filters require additional gain and is set in the K3 utility. > Using a narrower roofing filter without adding gain can produce the symptom > you describe. > Does your K3 have the old SYNS or the new SYNS? > Let us know what you find. > > 73, > Mark, WB9CIF > > -----Original Message----- > From: elecraft-boun...@mailman.qth.net <elecraft-boun...@mailman.qth.net> On > Behalf Of Mpridesti via Elecraft > Sent: Saturday, July 27, 2019 02:58 > To: Jack Brindle <jackbrin...@me.com> > Cc: Elecraft@mailman.qth.net > Subject: Re: [Elecraft] Sudden K3 failure > > Jack > > Did check that - nope not the problem > > Thanks > > Regards, > > Mark, K1RX > > >> On Jul 26, 2019, at 10:54 PM, Jack Brindle <jackbrin...@me.com> wrote: >> >> Perhaps the RxAnt is selected? Easy to do, easy to miss. Done it more times >> than I care to remember. >> >> 73! >> Jack, W6FB >> >> >>> On Jul 26, 2019, at 7:42 PM, Mpridesti via Elecraft >>> <elecraft@mailman.qth.net> wrote: >>> >>> Sorry- did not fully see the problem >>> >>> The receiver is not working on any band not just 40. Sounds like band noise >>> on all bands (sounds the same on every band). Did a comparison with a >>> second K3 to confirm the no receiver problem on all bands. >>> >>> Previously found by rotating some of the tmp connectors on the SYN boards, >>> got the TX problem to go away. So this “no receive” seems unrelated. >>> >>> Regards, >>> >>> Mark, K1RX >>> >>> >>>> On Jul 26, 2019, at 9:57 PM, Barry Simpson <vk...@optusnet.com.au> wrote: >>>> >>>> What about RX antenna ? >>>> >>>> Barry VK2BJ >>>> >>>>> On Sat, 27 Jul 2019 at 09:54, Mpridesti via Elecraft >>>>> <elecraft@mailman.qth.net> wrote: >>>>> Confirmed that at an early stage of the trouble shooting. No difference >>>>> with either antenna selected (only one port has an antenna). >>>>> >>>>> Regards, >>>>> >>>>> Mark, K1RX >>>>> >>>>> >>>>>> On Jul 26, 2019, at 7:28 PM, Dennis Moore <den...@mail4life.net> wrote: >>>>>> >>>>>> Any chance you accidentally switched antennas on 40m? >>>>>> >>>>>> Dennis NJ6G >>>>>> >>>>>>> On 7/26/2019 13:21, Mpridesti via Elecraft wrote: >>>>>>> Although I was able get the TX running again by merely doing a small >>>>>>> twist to all the TMP connectors that were reachable with top cover >>>>>>> removed and behind the front panel, unable to bring back the receiver >>>>>>> front end on 40 m. I hear noise and very weak signals but nothing like >>>>>>> the normal band noise and a hot receiver previously. >>>>>>> >>>>>>> Now wondering if another part of the radio (tmp connectors) needs a >>>>>>> small twist to break up oxidation. Not clear as to why just one band is >>>>>>> affected. Any thoughts from this great resource? >>>>>>> >>>>>>> Regards, >>>>>>> >>>>>>> Mark, K1RX >>>>>> ______________________________________________________________ >>>>>> Elecraft mailing list >>>>>> Home: http://mailman.qth.net/mailman/listinfo/elecraft >>>>>> Help: http://mailman.qth.net/mmfaq.htm >>>>>> Post: mailto:Elecraft@mailman.qth.net >>>>>> >>>>>> This list hosted by: http://www.qsl.net Please help support this >>>>>> email list: http://www.qsl.net/donate.html Message delivered to >>>>>> mpride...@yahoo.com >>>>> >>>>> ______________________________________________________________ >>>>> Elecraft mailing list >>>>> Home: http://mailman.qth.net/mailman/listinfo/elecraft >>>>> Help: http://mailman.qth.net/mmfaq.htm >>>>> Post: mailto:Elecraft@mailman.qth.net >>>>> >>>>> This list hosted by: http://www.qsl.net Please help support this >>>>> email list: http://www.qsl.net/donate.html Message delivered to >>>>> vk...@optusnet.com.au >>> ______________________________________________________________ >>> Elecraft mailing list >>> Home: http://mailman.qth.net/mailman/listinfo/elecraft >>> Help: http://mailman.qth.net/mmfaq.htm >>> Post: mailto:Elecraft@mailman.qth.net >>> >>> This list hosted by: http://www.qsl.net Please help support this >>> email list: http://www.qsl.net/donate.html Message delivered to >>> jackbrin...@me.com >> > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html Message > delivered to markmus...@outlook.com ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com