Dave,
With that IC running at the slow rate of 4800 baud, there should be no
problem with using a socket for it.
If you also have the switch for the KBT2 option installed, there will be
a tighter fit, but it should clear with a low profile socket.
73,
Don W3FPR
On 8/17/2019 1:30 PM, Dave Sublette wrote:
I am building the KI02 RS 232 interface module for the K2 transceiver. Is
there any reason why I can't use a low profile IC socket for this part?
The reason I am building this one is to replace the old one in my K2. The
old one died and I suspect it is the IC Max1406.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com
