Turn RF Gain to Zero dB???

Sent from my iPhone
...nr4c. bill


> On Aug 22, 2019, at 8:01 PM, Rick Dettinger <k7m...@gmail.com> wrote:
> 
> My KX3, SN 3271, is completely dead on receive.  The transmitter, side tone 
> and monitor control are working as ever.  Everything on the front screen 
> seems the same as ever.  I don’t get any S meter reading when I inject the 50 
> microvolt 7040 KHz signal from my XG1.  Not sure if it is staying in the 
> transmit mode with a transceiver switching problem, or just a problem with 
> the receiver circuitry.  I can transmit with the KX3, and receive with my 
> Collins 75A4.  I get 100 watts key down from my KXPA Amp.  I would like to 
> use the fine receiver in my KX3, and would appreciate any comments.  While I 
> only operate on CW, I listen to AM and SSB signals.  I can’t even here 
> anything when tuned to a strong local AM station, using a wide filter.
> Besides the KXBC3, my KX3 is equipped with the internal tuner.  
> Extra Credit for answering the following; If I am not going to use internal 
> batteries anymore, is there any problem with removing the cell holders and 
> cable.  Can I also remove the KXBC3 board for possible resale?  Would I need 
> to order a battery retainer if I am not using internal batteries? 
>    
> Thanks and 73,
> Rick Dettinger K7MW
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to n...@widomaker.com

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Reply via email to