Thanks for the replies. Can't explain how I missed MCnnn;, I made 3
passes thru the table.
73,
Fred ["Skip"] K6DGW
Sparks NV DM09dn
Washoe County
On 8/30/2019 5:50 PM, Grant Youngman wrote:
Look at the MCnnn; command, p15 of the Programmer’s Reference.
Sent from my iPhone
On Aug 30, 2019, at 7:00 PM, Fred Jensen <k6...@foothill.net> wrote:
I've gone through the K3 command list several times and I can't find a command
that allows me to select a specific frequency memory channel from a macro.
I've been making a few CW QSO's on 60 m, I have an empty slot on my KPOD, and
I'd like to:
M>V
Select slot
M>V
My 60 meter slots are set up for channel hopping thru the 5 "channels" with VFO
A set to center of channel [CW, PSK] and VFO B set to the suppressed carrier frequency
for USB.
73,
Fred ["Skip"] K6DGW
Sparks NV DM09dn
Washoe County
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com
