The waterfall height range adjustment is from 20-139, with 100 as the default. With height set to 139, slightly more than 1/2 the display is waterfall — maybe 60%
At that height it takes about 10-11 seconds for a signal to move to the bottom of the display Grant NQ5T > On Oct 19, 2019, at 4:31 PM, Ingo Meyer, DK3RED <ma...@qrp4fun.de> wrote: > > Hello Mike, > > > > I too intend to buy the PX3. Did NOT see answer to your question. > > I would be interested IF you got a direct reply with ANSWERS? > > There was only one answer direct and no one via the mailing list. > > > Ingo, your can adjust the height to only about 1/2 the size of the window. > > There is a menu selection for it called Waterfall Height. > > This statement surprises me, because the manual says for the menue > "Waterfall" the default is "100" to change the height of the waterfall window > when the display is in waterfall mode. > > Does that mean 100% of the half display height? > > And there was no answer to my second question: > > > If the waterfall is increased to 100% height (if possible), how long does it > > take for a signal on the waterfall to reach the bottom from the top? > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
