Kevin,
I don't think you can do that with a KX3 Utility configuration file.
But you should be able to do it with Macros - look at the commands in
the K3/KX3 Programmer's reference.
An advantage of using Macros, is that they are stored in the KX3 and not
in a computer file, so no worry about the OS running on the computer.
A side comment -- Why are many inserting hyphens in Elecraft model
designations? It is KX3 (not KX-3), K3 (not K-3), K3S (not K-3S), etc.
There are only 2 exceptions to this - the Elecraft N-Gen and K-Pod.
Look at the Elecraft products - no hyphens. Leave the hyphens to other
manufacturers who change the number after the hyphen to designate an
"upgraded" version that you can only obtain by buying the new model.
The Elecraft KX3 is not an upgraded KX2, it is an entirely separate radio.
END RANT
73,
Don W3FPR
On 11/12/2019 4:25 PM, Kevin Zembower via Elecraft wrote:
Hello,
My club is running a KX-3 with a Windows (7? something old and at end of
life) workstation. I've installed the KX-3 Utility program and have used
it successfully to program the radio and save the configuration.
I recently wrote about using different headsets in place of the MH-3
mic. I'm going to test the suggestions and advice this Thursday when I
go to the club. However, if I'm successful, it looks like there might be
a half-dozen or more configuration changes to be made to switch between
different headsets or back to the MH-3 mic.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com
