Don, Tnx for the reminder on checking the audio on the ALC meter. It was so long since I had a problem I forgot about doing that. There was no audio shown on the K3. What happened is that in WSJT-X > Settings > Audio > Soundcard, The OUTPUT was no longer Speakers (USB Audio CODEC). Somehow it changed to SPEAKERS (Realtek High Definition Audio), which is my audio for my pc. Changed it to what it was supposed to be and now I am fine. I have no idea what changed the setting as I was working station after station when this happened. Weird.
73, N2TK, Tony -----Original Message----- From: Don Wilhelm <donw...@embarqmail.com> Sent: Wednesday, November 13, 2019 7:40 AM To: tony....@verizon.net; elecraft@mailman.qth.net Subject: Re: [Elecraft] K3 - WSJT-X help Tony, Soundcard problem or K3 problem. This is most commonly a problem with audio into the K3. How many bars illuminate on the ALC meter? It should be 4 with the 5th bar flashing. If not, look at the audio levels. See the article on my website www.w3fpr.com 73, Don W3FPR On 11/13/2019 7:04 AM, N2TK via Elecraft wrote: > Scratching my head. I was making Q's on FT8 with my K3 and WSJT-X, > v2.0.1 when I no longer would get power out. > > WSJT is keying the K3 (Red transmit light is on) but no power out. The > K3 keys fine with power out in CW or other modes is fine. WSJT is > talking to the K3. WSJT shows the correct frequency, it is decoding > and when I go into Settings > Radio and hit Test CAT it goes green. > When I hit TUNE on WSJT it turns to red and the red TX light on the K3 comes > on. But no power out. > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com