When I run MMVari after running WSJT-X, I sometimes have the similar experience. So, I have to re-tune the audio property for MMVari. It seems WSJT-X sets Windows audio property to its favorite setting and never set it back to the original setting on its termination.
73 de JH3SIF, Keith > 2019/12/21 17:37、HP <pfizenma...@q.com>のメール: > > K3S using internal USB codec and W7 . > > I have an issue I dont understand --- N1MM /MMTTY -- RTTY --- using VOX for > PTT. > > If I leave LIN OUT levels (about 35) and Windows levels (49 percent) then > WSJT -sets up with 4 bars ALC 5th flickering - > makes no difference if I run WSJT alone or run it thru N1MM running WSJT no > change in settings . > > Then try to use AFSK A for RTTY I get no ALC bars at all - I see the RTTY > diddles on the MMTTY screen - nothing I do will get any bars > if I do nothng but switch to DATA A change nothing else - I get solid 7 bars > and have to reduce MIC gain (LIN) to 10-11 from 35-37 to get 4 bars 5th > flashing . > > > > I have the RTTY freq set 915-170 -MMTTY decodes fine in RX. > > What am I missing ?? > > > Hank K7HP > > > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to jh3...@sumaq.jp ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com