All 15 pin Y cables are not the same. You need to have all 15 pins
connected from end to end. VGA cables will NOT work.
73,
Don W3FPR
On 12/24/2019 9:22 AM, Jim Rhodes wrote:
The ACC cable can be connected through a simple Y cable (I think I bought
mine from Elecraft) so that the remoterig box can be left connected all the
time. Or you can buy a YBox, or build your own like I did before they were
available. As for the PTT, I put together a box with 6 parallel RCA jacks
for PTT on one side and 6 more on the other side for KEYOUT. (I have amps
for the 2 meter and 70 cm transverters.) The only other connection I need
to worry about is the serial cable. I updated the i/o boards to the new one
with the USB connection so that I can leave both the serial and USB cables
connected at all times. So no cable switching when I want to go remote. I
live in an apartment building, so my KPA500 is packed away in a box for the
time being.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com
