Rys,
The first thing to try are the steps indicated in the K3 manual listing
of errors.
If those do not help, and this is an older K3, try removing the front
panel assembly (the KDVR3 manual page 7 has good instructions for doing
that). If the pins on the front panel connector are tin plated, they
should be replaced with the gold pins (Elecraft has a kit). In any
case, removing the front panel assembly and simply replacing it will
wipe oxidation from the pins and can restore proper operation.
73,
Don W3FPR
On 1/4/2020 2:02 PM, Ryszard Tymkiewicz wrote:
I have been using K3 for MANY years and the first time I got a message
"ERROR DLL" ..there was a high noise level and I was not able to tune to
stations. It was in my second QTH..when I got back home seems everything
is OK. I don't know if it is a problem with contacts? If so which ones I
should clean?
73 Rys
SP5EWY
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com
