Hoping someone has a suggestion for how I can work around some local QRM. I have a kx3 with filters installed I have wsjtx running. I've recently added a px3 to see if it would help provide insight.
I find intermittent broadband noise that desenses my receiver on multiple bands. 1) It appears to either be On or Off, no visible fading. (Transitions are <<1 second). Sometimes a little flickering but usually extends for minutes to hours. 2) When on, signals in waterfall completely disappear or are reduced to just a couple nearby (loud) stations 3) when on, it wipes out at least one whole band (usually 20m, sometimes 40m as well). 4) when on, the full 200khz slice in px3 goes green snow 5) still happens if I throw breaker in my subpanel and am running off of batteries 6) with 30 min of fiddling, haven't been able to see it in a kiwisdr node less than a mile away 7) pskreporter still shows me to be getting out (to the extent I can) Broadband, no visible peaks, so not sure I could triangulate it by wardriving with a Kerberos. Any suggestions? Is there a way/practice to maybe leverage the filters to increase rejection of the interference? Thanks in advance, Scott AD6YT ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com