The K4 has audio tone generation commands. Wayne
---- elecraft.com > On Feb 15, 2020, at 2:12 PM, Andy Durbin <a.dur...@msn.com> wrote: > > Good to know I wasn't the only one wanting to do this. In my case I wanted > to make my TS-590S beep if power was manually set above my controller's > programmed band max power limit. I force the power setting back to max and > beep. It was hard to find a way to make the TS-590S beep but I eventually > found a CAT command that would beep but change nothing, AN999;. > > If a rig has high and low tones for signalling to the operator it's > unfortunate that there is not a CAT command dedicated to sounding those > beeps. Perhaps something to consider for the K4? > > 73, > Andy, k3wyc > > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to n...@elecraft.com ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
