Mick, I have a KPA/KAT500 combo connected to my 6600. Both the KPA and KAT are 
connected to “serial” ports (USB to serial adapters) on the shack computer that 
runs 24/7. None are connected to the Flex. Elecraft’s excellent remote software 
is running on the shack computer in Host mode. This has to be started manually, 
but could be auto started, I’ve just not done so. I can access my shack 
computer remotely to (re)start the hosting if the computer reboots for any 
reason. 

From the laptop, I can connect to the shack hosted software and have full 
control over both the KPA and the KAT. A quick bump of RF, like the Flex tune 
mode instantly tunes the KAT, selects an antenna based on the RF. Putting the 
KPA in Operate mode automatically selects the proper band on the next burst of 
RF. 

I use this whether on my local LAN but not in the shack, or hundreds 
(thousands) of miles away. I’m very pleased with the KPA/KAT functionality for 
the Flex. 


tnx
Mike / W5JR
Alpharetta GA


> On Feb 26, 2020, at 18:02, w6mob <w6...@arrl.net> wrote:
> 
> I am trying to run my Flex6600/ KPA500/KAT500 remotely.
> 
> Does anyone know if it is possible to hook up a PC & a Flex to a KAT500 at
> the same time?
> 
> I have the KPA500/KAT500/Flex working together. I also have the KPA500
> Remote S/W working on a PC. But I would like to also monitor/control the
> KAT500 at the same time.
> 
> As best I can tell you can only connect a single KXUSB cable to the KAT.
> 
> Any suggestions?
> 
> Thanks,
> Mick
> W6MOB
> 
> 
> 
> --
> Sent from: http://elecraft.365791.n2.nabble.com/
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to w5jr.li...@gmail.com 
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Reply via email to