Don't know what you mean "doesn't represent your transmitted signal" It is leakage of your signal at the IF, I see it with my SDR that is tied to the P3 IF out and it looks exactly like the signal I see on a spectrum analyzer using a coupler. de Dave K5MWR
On March 15, 2020 8:11:07 PM CDT, Brian K0DTJ <huntin...@coastside.net> wrote: >As I recall, if you disconnect the RS232 thru the P3 to the K3 it the >P3 will display your spectrum since it doesn't know to mute during TX. >Someone from Elecraft said it was due to "leakage" and is at IF so >doesn't represent your transmitted signal. Seems like you found a >software way to do this. :-) > >73, >Brian, K0DTJ > >-=-=-=-=-=-=-=-=-=-=-=- >Groups.io Links: You receive all messages sent to this group. > >View/Reply Online (#32169): >https://groups.io/g/Elecraft-K3/message/32169 >Mute This Topic: https://groups.io/mt/71988488/839119 >Group Owner: elecraft-k3+ow...@groups.io >Unsubscribe: >https://groups.io/g/Elecraft-K3/leave/1881001/1870350234/xyzzy >[do...@suddenlink.net] >-=-=-=-=-=-=-=-=-=-=-=- -- Sent from my Android device with K-9 Mail. Please excuse my brevity. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
