It is not a macro. It’s under the Configuration tab of the KX2 Utility …. it will set the KX2 tie to your computer time.
Grant NQ5T > On Apr 8, 2020, at 7:56 PM, Ron Rossi <k...@comcast.net> wrote: > > I did not find a direct set for the clock. I know about the MN074; command to > bring up the clock and then UP;/DN; to change the hour or min or sec from > whatever it happens to be. Setting the time automatically would have to start > from a known state. > > 73 es God Bless de KK1L...Ron Rossi (k...@comcast.net) <>< > QTH: Jericho, Vermont > My page: http://kk1l.com > > On 4/8/2020 19:45, Grant Youngman wrote: >> You can set the tine from the KX2 utility …. >> >>> On Apr 8, 2020, at 7:41 PM, KK1L <k...@comcast.net> wrote: >>> >>> Folks, >>> >>> Wondering if it is possible to send a command to clear the clock on the KX2. >>> I am considering using a macros to set the time, but the menu only allows >>> up/down jof the HH, MM, SS; rather than setting an actual value. If I could >>> clear the clock to zero I could also set the time. I have looked through the >>> command set pretty well and think the answer is "no", but figured I would >>> ask. >>> > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
