Aaron,
Are you stating that with the K2 power switch in the OFF position and
simply plugging the power cord into the rear power jack, causes the supply
to shut down?
73,
Dave, W8FGU
On April 28, 2020 18:16:47 Lou Voerman W2ROW <voer...@att.net> wrote:
Hi,
Did you do the resistance check on page 76 of the latest manual. It checks
for a short from the collector of Q7 or Q8 to ground after installing the
heat sink. If there is a short there, the manual suggests the most likely
cause.
Lou W2ROW
--
Sent from: http://elecraft.365791.n2.nabble.com/
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to d...@w8fgu.com
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com
