I like the way scope probes have a tip that hooks onto a component lead,
and a little alligator clip for the ground. So I thought I could use a
passive scope probe in the X1 position on my DVM too. I hooked one up
with a BNC-bannana adapter, but it turns out that there seems to be a
series resistance of about 250 ohms, which is inconvenient for
resistance measurements. I got the same result from several probes.
My question is, what's going on here? Schematics of probes I found all
showed that in the X1 position they were straight through.
--
73,
Victor, 4X6GP
Rehovot, Israel
Formerly K2VCO
CWops no. 5
http://www.qsl.net/k2vco/
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com
