I have seen a lot of answers.
These are all true, but what is the exact way of working.

73 Henk

-----Oorspronkelijk bericht-----
Van: elecraft-boun...@mailman.qth.net <elecraft-boun...@mailman.qth.net> Namens 
Wes
Verzonden: zaterdag 6 juni 2020 21:22
Aan: elecraft@mailman.qth.net
Onderwerp: Re: [Elecraft] K3(s) main oscillator calibration

The various reference calibration methods, including direct measurement of the 
TCXO that I do, just determine what the actual reference frequency is, but 
don't change it.

This value is then used internally to compute the correct frequencies.

Wes  N7WS

On 6/6/2020 11:47 AM, h...@kpnplanet.nl wrote:
> Hi all,
>
>   
>
> In the CONFIG menu REF CALL the value of the main oscillator can be set.
>
> However, this does not impact the TCXO frequency at all in a direct sense.
>
>   
>
> Whatever the REF CALL value, the TXCO frequency stays the same.
>
> This can also be seen in the schematic.
>
> The TXCO just outputs 49.380 MHz and has no 
> voltage/frequency-adjustment input.
>
>   
>
> So where and how does the frequency correction take place?
>
> Somewhere at the 15 kHz level or in the KSYN3 DDS / KSYN3A divider?
>
>   
>
> Who can explain the principle.
>
>   
>
> 73 Henk
>
> PA0C
>
>
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message 
delivered to h...@kpnplanet.nl 


-- 
Dit e-mailbericht is gecontroleerd op virussen met Avast antivirussoftware.
https://www.avast.com/antivirus

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Reply via email to