P 40 & 41 of the K2 manual walks you through the process of hooking the display & control boards together and to the main (RF) board. Use that as the final guide.
To get the display off, you'll have to take a few screws out and just pull forward. Make sure you remember to get the screw that holds the control board to the display board. If you have the DSP or AF, that may have to be unplugged / unscrewed as well. - Keith KD1E - - K2 5411 - -----Original Message----- From: Mark I just received a terrific pre-built K2/100/SSB unit. It works wonderfully, but it would appear that I need to get inside and "fiddle" with the front panel jumpers to configure the microphone. _______________________________________________ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
