Are you talking about removing the cable from the amp? It just pulls out. There is some tension on the contacts so it will require a little force. Just pull straight out.
If you are talking about the chassis mounted Power Poles, there are screws on the inside that hold a bracket and wedge which keep them secure to the chassis. Dave wo2x -----Original Message----- From: elecraft-boun...@mailman.qth.net <elecraft-boun...@mailman.qth.net> On Behalf Of Salvatore Ted K2QMF Sent: Monday, June 8, 2020 4:02 PM To: elecraft@mailman.qth.net Subject: [Elecraft] Help with KPA1500 P/S Hello All, How do you remove the PowerPoll P/S connector from the back of the KPA1500?? Any help much appreciated! I don't want to force them out! Thanks, Sal K2QMF ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to rocke...@gmail.com ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com