Carlos,
Yes, that is an unfortunate effect of the difficulty in obtaining
thru-hole capacitors. That particular one cannot be bent over because
it will interfere with the PA transistor mounting.
If you also ordered the KSB2 option, there is an extra 0.01uF (10nF)
capacitor in that kit. It has a narrow lead spacing, but can be used to
solve this problem. If no KSB2, then do you have a capacitor that you
can use instead of the one supplied.
73,
Don W3FPR
On 7/1/2020 5:19 PM, carlos.p wrote:
hi, c 135 10nf cap fitted on the bottom side of the rf board,
between the 2d fastener and transistor
seems sticking out to high, i wonder if someone experienced this,
not soldered in yet, i wait for some possible comments on that,
regards carlos on6cn
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com