I plan on calling them tomorrow (Monday). Thanks, Mike NJ2OM
> On Jul 5, 2020, at 11:38 AM, Don Wilhelm <donw...@embarqmail.com> wrote: > > Mike, > > It is more complicated than that - there is no TUNE information on the RS-232 > lines but if the MFJ ATU has a signal to activate TUNE on the K2, and I do > not see any reference to a TUNE signal in the Kio2 Programmer's Reference > manual. > > Best to ask MFJ how they detect TUNE mode in the K2, and once you have that > answer, we can tell you how to construct the cable for both the PC and MFJ > ATU connections. > > 73, > Don W3FPR > >> On 7/5/2020 9:08 AM, NJMike wrote: >> In order to put the MFJ-993B automatic antenna tuner into TUNE mode from the >> radio, an interface cable is required. >> MFJ has cables for the major radio brands. I’m not sure if it’s even >> possible for the K2 since I’m already using the RS-232 port to interface >> with the laptop. >> The cable, I believe, does nothing more than initiate TUNE mode on the tuner >> when TUNE is initiated on the radio. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
