Hi guys!
Like many of you I worked the 13 Colonies event this last week. I have a
K3, s/n in the 5600 range with the new SYNs and I'm running a KPA500
into a Carolina Windom when it isn't arcing. I have TX EQ set up like this:
50 Hz = -16 dB
100 Hz = -16 dB
200 Hz = -3 dB
400 Hz = 0 dB
800 Hz = 0 dB
1.6 KHz = +3 dB
2.4 KHz = +3 dB
3.0 KHz = 0 dB
Mic drive at 9, and compression is set at 20 and I use a Yamaha
Shedmaster CM-500 headset. My wife thought I had some weird disease due
to all the black specs shedding from the headphone pads...
I wanted to pass along to you Elecraft engineers my experience during
this event. I am a CW-only op for the most part and really never hear
signal quality reports other than the obligatory 5xx. Switching
reluctantly to SSB and swinging down that odd foam thing which usually
resides over my head I received numerous comments like: "Best signal of
the day here, very clean audio!" and "Wow! It sounds like you are in the
room here, excellent audio" and "Your signal is audible above the
pileup because it is so clear!" and a few others which really surprised
me. Who knew you could actually send your voice through a ham radio!
I take no credit for any of this other than turning the rig on. I heard
many crappy sounding SSB signals during this event, some even difficult
to understand despite good signal strength and I appreciate Elecraft
making the K3 operate so well, I believe it was a real advantage. I can
only hope the K4 will build on this quality!
Thanks again, guys!
Howie / WA4PSC
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com