KIO3B Interface Option manual:
Monitoring RS232 Data
If you have a device such as a STEPP-IR antenna controller or pc program
that monitors the RS232 port, you
can continue to use it with the USB port active.
You can connect your device to the RS232 data in two ways:
1. Use the RJ-45 to DE-9S cable plugged into the RS232/USB port on the
K3 and sense the RS232 signals at the DE-9S connector.
2. If you have a P3 Panadapter connected to the K3, sense the RS232
signals at the connection to the PC connector on the P3. Never attempt
to sense RS232 signals at the XCVR connector.
Regards,
Mike VP8NO
On 31/07/2020 16:35, John Simmons wrote:
K3 won't do both RS232 and USB at the same time. You'll have to put a
software shim in your PC to control the SteppIR.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com