Nice install.
I took the GEM mounts and plywood one more step. I used a ~12" round
3/4" plywood disk and mounted three RAM mounts;
https://www.rammount.com/ . KX3, PX3 and Plastic "box". The box can
hold audio ADC and CAT control or for picnic table OP's, and antenna. I
am able to adjust KX3/PX3 angle and position for best OP...
73, steve WB3LGC
On 8/9/20 7:56 PM, Mark Goldberg wrote:
Gem's Products KX3 and PX3 mounts and some plywood works for me. See
the bottom of this page:
https://sites.google.com/site/marksmobilehamstation/
73,
Mark
W7MLG
On Sun, Aug 9, 2020 at 1:18 PM Ron Bell via Elecraft
<elecraft@mailman.qth.net> wrote:
Any recommendation for a desktop stand for a KX3 and PX3 that would keep
both at proper angle and manage the wires?
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to marklgoldb...@gmail.com
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to sm.shearer...@gmail.com
.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com
