Fixed, power cycled my microKEYER III, which keys the KPA1500, and all is good.
73, Jim N7US -----Original Message----- From: Jim McDonald Sent: Wednesday, November 4, 2020 08:14 To: Mark Goldberg <marklgoldb...@gmail.com> Cc: Elecraft Reflector (elecraft@mailman.qth.net) <elecraft@mailman.qth.net> Subject: RE: [Elecraft] KPA1500 RX signal loss Yes, the TX LED was on, that was it! Now I gotta figure out why. Thanks, Mark. 73, Jim N7US -----Original Message----- Check if the key line is stuck on. Is the TX LED on when in receive? 73, Mark W7MLG On Wed, Nov 4, 2020 at 5:56 AM Jim McDonald <j...@n7us.net> wrote: > > My KPA1500 seems to disconnect the antenna when switching the amplifier from > standby to operate. It transmits OK but the receive signal path seems to be > open. > > 73, Jim N7US > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com