You can do this with K3 or K3S with a sub-receiver, but you
don't need the sub-receiver with the K4 because it can monitor 2
6M frequencies with just basic K4, you can get the digital audio
stream through the USB connection or through the audio
connection on the back panel.
The left channel will be VFO A and the right channel will be VFO
B. Using the USB connection means you don't need a "sound card"
to digitize the audio.
If you are just looking for activity, just listening to the
audio may be enough.
73 Bill AE6JV
On 11/14/20 at 8:56 PM, k...@bosscher.org (Tom) wrote:
Does the K4, especially the K4D, have two audio codecs, one for
each receiver, available via the USB connector?
This would be highly desirable with the digital mode, being
able to monitor the MSK 144 and FT8 frequencies on 6 at the
same time.
Tom K8TB
-----------------------------------------------------------------------
Bill Frantz | Concurrency is hard. 12 | Periwinkle
(408)348-7900 | out 10 programmers get it | 150 Rivermead
Rd #235
www.pwpconsult.com | wrong. - Jeff Frantz | Peterborough,
NH 03458
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com
