I'm thinking of replacing an old SPE amp with a KPA1500. I have 4 antennas: 10/15/20 yagi, 40M yagi, 80/160 dipole and an all band hytower vertical so will probably have 3 switched antennas to one antenna port on the KPA1500 and 1 antenna to the 2nd antenna port. After 'training' on all freq/antenna combinations I'll tend to have 2 or 3 settings for each freq/bin. When I tune from one frequency to the next and one bin to the next bin, the tuner will have to select one of the 2 or 3 settings for the bin. Does it wait until I transmit (a dit with the key) to select the new setting or will it track with the k3 and make changes as I move from freq to freq. Will I notice the tuner trying each setting (lights flashing, relay noise) until it finds the correct setting? My older SPE has a similar freq/bin concept but has 4 antenna ports and 1 set of band/bins per antenna port. This allows it to know exactly setting to use which is nice. But... maybe not as durable as the KPA1500. Thanks for any advice. Gary SlagelKT0A ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
