Thanks sir...
73, and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Volunteer Examiner
ARRL Technical Specialist, RFI
ARRL Asst. Director, NW Division, Technical Resources
On 12/2/20 8:24 AM, Gordon LaPoint wrote:
Dave,
I have done many RTTY contests and regular qso's using the
KPA500/KAT500/K3 over the last few years. I run full 500 watts with no
problems, the temp gets up to the 60 to 65 range a lot when calling CQ
in a contest, or during a 10 minute tx. If the temp gets to 70 then the
fan kicks into high gear and is very noisy, but still within specs.
Gordon - N1MGO
On 12/2/2020 9:57 AM, Dave Cole wrote:
Hi,
Any recommendations as to the max power I might run using a KPA500 and
KAT500, on say, a three to five minute transmission?
Also, what is the recommended max temp for the PA on this device as
measured by the KPA500?
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to d...@nk7z.net
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com