John,
To keep up with all the changes, you should read the firmware release
notes too. Mark up the manual with that information.
73,
Don W3FPR
On 12/26/2020 12:47 PM, John Lemay wrote:
Ken
Thanks for replying quickly.
I am reading the current (D10 version) manual, but on looking at your reply
I decided to check out the errata - and there it is :-
< Pg. 14 (VFO Tuning Controls): Holding SUB now turns diversity receive
on/off. To link VFOs, use CONFIG:VFO LNK >
And it works fine of course.
It would have saved me hours of head scratching if someone at Elecraft had
updated the manual .....
John G4ZTR
From: Ken K6MR [mailto:k...@outlook.com]
Sent: 26 December 2020 17:29
To: John Lemay; Elecraft Reflector Reflector
Subject: RE: [Elecraft] K3 Sub Receiver
You are reading an old description of the SUB button. A firmware change
made the long press of SUB the activation of Diversity. Linking is done
through the config menu.
Ken K6MR
From: John Lemay <mailto:j...@carltonhouse.eclipse.co.uk>
Sent: Saturday, December 26, 2020 09:13
To: Elecraft Reflector Reflector <mailto:elecraft@mailman.qth.net>
Subject: [Elecraft] K3 Sub Receiver
Hello all
I have a K3 with the sub-receiver installed, and working. But .........
The handbook says < Holding SUB links the VFOs (whether the sub
receiver is on or off). The kHz decimal point of
VFO B flashes as a reminder. VFO A is the master,
moving both VFOs in tandem. >
I cannot get this to work. I can get the sub rx to be on or off (by tapping
SUB), and I can get Diversity to work as well (with a long hold of SUB).
What other settings can there be on the radio that make it impossible to
select moving both VFO's in tandem ? - which is exactly what I want.
Thanks, and seasons greetings !
John G4ZTR
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com
