If an ATU tune finishes like that, with --, then it did not find a
match! (and will be in a random state).
You don't have enough power for a successful Tune.
Try running the TX gain calibration with the K3 Utility.
Or, with a dummy load, ATU in BYP, make sure TUN PWR is at "nor", then
set pwr to 5.0 watts exactly and long press XMIT to send a carrier for
several seconds. (That will do a manual tx gain cal on that freq).
Then engage ATU and do an ATU TUNE and it should find a match.
If the TX gain cal fails, something is wrong with the LPA.
Keith WE6R Elecraft Tech.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com
