Well, I’ve still got some, go back quite a few years, but they are in my junk box! 73 de David, M0XDF (K3 #174, P3 #108) -- Now, here, you see, it takes all the running you can do, to keep in the same place. If you want to get somewhere else, you must run at least twice as fast as that! -Lewis Carroll, mathematician and writer (1832-1898)
> On 17 Jan 2021, at 19:51, Josh Fiden <j...@voodoolab.com> wrote: > > 1/8” doesn’t exist. They’re all 3.5mm. > > Biggest problem I’ve seen in cheap import connectors is poor quality plating. > Both material & surface finish. > > 73 > Josh W6XU > > Sent from my iPad > >> On Jan 17, 2021, at 6:29 AM, David Ferrington, M0XDF <m0...@alphadene.co.uk> >> wrote: >> >> No one seams to have mentioned that there is a small difference in diameter >> between a 3.5mm plug and a 1/8” plug (which is 3.175mm). >> However, I believe the socket on the K3 is a 3.5mm one, so that should not >> have caused this. >> I’m sure someone like Don can confirm this. >> >> > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com