Don't understand your "follow option" question. I run mine in Fixed
Tune Mode which holds the span [i.e. edge frequencies] constant and the
two VFO's show up as two vertical cursors in the spectrum display. The
cursors move as I tune, and when I go beyond the edge, the span shifts
by the amount I've set in the menu ... I use a full span. In the
Tracking Mode, your receive frequency is always centered and the
spectrum moves past it as you tune.
73,
Fred ["Skip"] K6DGW
Sparks NV DM09dn
Washoe County
On 2/8/2021 2:34 PM, Dave Cole wrote:
How does one set the follow option, I just looked through the menu of
the P3, and don't see it.
73, and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Volunteer Examiner
ARRL Technical Specialist, RFI
ARRL Asst. Director, NW Division, Technical Resources
On 2/8/21 12:39 PM, Fred Jensen wrote:
Yes, it has been discussed, and yes, that is the case. It seems to
be most prevalent when returning to a band after moving off for a Q,
such as in NAQP's when the return is being commanded via CAT
command. In fairness to the Elecraft developers, it /*appears*/ that
it is attempting to put the frequency you are returning into the
center-ish part of the display which is not totally unreasonable.
73,
Fred ["Skip"] K6DGW
Sparks NV DM09dn
Washoe County
On 2/7/2021 12:28 PM, Jim McDonald wrote:
I know this has been asked before but I don't remember the answer.
Isn't the P3 supposed to remember the span and center frequency from
band to band? It seems to change center frequency even if the band
hasn't changed, but that may not be the case.
73, Jim N7US
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com
