I don't think so -- you'd need an adapter that just doesn't connect that pin.
On Sat, Feb 27, 2021, 20:19 Bill Lederer <w8lv...@gmail.com> wrote: > Folks: > > I recently bought a WKmini to use for portable operation. In reading the > documentation, it turns out that the cable supplied that goes from the OUT > port of the WKmini to the key jack on the KX2 keys the tip with the code, > but use the ring to do a PTT function. I'm fine with QSL on the KX2, so I > don't need this. And in fact, the KX2 will key when either the ti or ring > is engaged by the WKmini. > > Experimenting with the MacWinKeyer.app, there is a selection to turn off > the PTT function, and that works nicely. I had hoped that exting the > program would leave that setting in the "no PTT" mode, but it is not to be. > > So is there a way that the KX2 can be convinced to only pay attention to > the tip when the mode is set to "Hand" and not the ring? > > Thanks, > w8lvn > > -- > --w8lvn-- > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to ju...@juliatuttle.net > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com