My radios only do the power ramp up the first time you transmit after changing bands. Doesn’t take that long though. Less than one second I would guess. As noted, it’s the power control loop. Usually it’s not that noticeable.
Ken K6MR From: John Reilly<mailto:reill...@gmail.com> Sent: Thursday, April 29, 2021 20:21 To: Elecraft@mailman.qth.net<mailto:Elecraft@mailman.qth.net> Subject: [Elecraft] [K3] RTTY Questions I have two K3 questions: 1. In Data MD, AFSk A, you can set the baud rate to either 45 or 75. Is the baud rate just for the RTTY reader? Does it affect anything else? 2. With my K3s power set to 100w, RTTY starts at a little below 50w and and then fairly slowly builds to 100w (measured on an external wattmeter). I've done a TX calibration -- no change. What is going on? Thanks, - 73, John, N0TA ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to k...@outlook.com ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com