Not upcoming, e season already in progress! Seeing at least single hop every day.
Leave PR6 on all the time. K3 is deaf on 6 without it. 73 Josh W6XU Sent from my mobile device > On May 1, 2021, at 7:47 AM, Mike Flowers <mike.flow...@gmail.com> wrote: > > Hi Folks, > > > > I recently purchased a used PR6 6-Meter preamp in anticipation of the > upcoming 6M summer season. > > > > My K3 has the KXV3A Interface option installed. I have a K-Line station; > K3,P3,KAT500,KPA500. > > > > My 6M antenna is my SteppIR 3L. > > > > I've downloaded the PR6 and KXV3A manuals, and I'm reading the Elecraft K3 > Owners manual and Fred Cadys K3 manual to understand the signal path for the > proper use of the PR6 preamp. This is the first time I've needed to use > the RX ANT feature on the K3, and there are a lot of ways to configure the > signal path in the K3, I've discovered. > > > > My 6M operation is pretty simple. The SteppIR gives me a 3L yagi on 6M. I > have the KAT500 configured to recognize the SteppIR as a resonant 6M antenna > on ANT1 and the KPA500 gives me a full 500W if I need it. > > > > I'm looking for guidance for using the PR6 in this configuration, and I will > appreciate any suggestions and cautions about how to effectively use the PR6 > for my 6M operation. > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
