And for the bands to cooperate!! :-) Congrats, Erik.
> On May 25, 2021, at 1:01 PM, Erik Tkal <etks...@gmail.com> wrote: > > Hi Don, > > Yeah, I don’t often perform measurements on components already installed in a > circuit, so the behaviour was confusing. I thought I bought a nice DMM but I > guess it was just a fluke… ;-) > > Anyway, I got it finished and everything is operational, now just have to > wait for the IC-705 interface cable! > > Thanks and 73, > Erik Tkal - W1QED > > > > On May 24, 2021, at 18:01, Don Wilhelm <d...@w3fpr.com> wrote: > > Erik, > > Yes, using auto ranging on the DMM can cause false readings. Try to set the > fixed range a bit above the highest expected resistance for the best results. > It all depends on the voltage the DMM applies to the circuit. Too high a > voltage can make ICs and transistors conduct causing a low reading. > > 73, > Don W3FPR > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to w6...@me.com ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com