Hi Mike Windows 10 should detect the cables with FTDI chipset without any additional driver installation. The KXUSB cable uses the FTDI chipset and it enumerated as a com port just fine.
73 Dave wo2x Sent from my waxed string and tin cans. > On Jul 2, 2021, at 10:05 PM, Mike Dodd <m...@mdodd.com> wrote: > > My K3s, KPA500, and KAT500 are connected to my Win 8.1 Pro PC, and > everything works fine. I am about to replace the Win 8.1 box with a Win 10 > Pro box, and need to connect the Elecraft equipment to it. > > QUESTION: > I have a PDF document, "Application Note AN_396 FTDI Drivers Installation > Guide for Windows 10, Version 1.0, Issue Date: 2016-02-02." Are these > instructions correct and current, or is there later information I should read? > > Or is the FTDI driver already installed in Win 10 Pro, so I don't have to do > anything except plug in the USB dongle? > > Thanks for any information. > > 73, Mike N4CF > > > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to rocke...@gmail.com ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
