It sounds like your audio is not getting to the K3. There are
many places it can get lost, including wsjt-x, the selection of
output devices in wsjt-x, the OS audio chain (seen frequently in
Windows, but also other OSes), and in the K3 -- are you sure
your computer is connected to the transmit audio.
73 Bill AE6JV
On 7/3/21 at 5:35 PM, doug49...@gmail.com (doug dietz) wrote:
I have k3 with all the options available except finals. I have
installed the ftdi driver. The receiver sends frequency and
decodes wsjt signals correctly. In the wsjt program the cat
test turns green and the ptt works ok. When I call cq the
transmitter is keyed but no power is sent out. I think I’m in
the wrong mode. Any suggestions. I cannot get it to “data
a”? HELP
-----------------------------------------------------------------------
Bill Frantz | When an old person dies, a | Periwinkle
(408)348-7900 | library burns. - Joe McGawon | 150
Rivermead Rd #235
www.pwpconsult.com | Irish Ethnographer |
Peterborough, NH 03458
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com
