Hi all I’ve typically been using my MH3 with a KX3 for /P operating from my campervan. This last week I’ve been doing some SOTA activations, so I’ve been using my KX2 instead.
I noticed a couple of issues when setting the Mic gain. I followed the advised procedure and reduced PWR=0, TX CMP=0, squeezed the PTT and spoke normally into the MH3. I found that there was no indication at all on the ALC meter until at about MIC=65, ALC jumped to 6-7. Mic bias is on. I also noticed on a few occasions that when operating, pressing PTT had no effect until I slightly increased the MIC gain. The MH3 works fine on my KX3, so I’m assuming the MH3 is OK, but I can’t figure where the problem lies. 73 Gareth – M5KVK ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
