* On 2022 28 Jan 12:54 -0600, Wayne Burdick wrote: > If you're using a non-Elecraft mic with any of our radios (K2, K3, K4, > KX2, KX3), please send me a very brief reply with the manufacturer, > model number, and a note about whether any modifications were > required. We're putting together a database of these for customer > reference.
K3 front panel: Kenwood MC-50 with a 4 pin to 8 pin adapter, set for high impedance and the K3 set for high impedance. It seemed to drive better with high impedance than low impedance. K3 rear panel: Yamaha CM-500, Bias turned on and set for low impedance. I have macros in the K3 utility to set the compression and mic gain levels for each mic. I do not change the TX equalization when I change mics. The MC-50 has been rock solid. The MC-60A I had tried before, not so much. 73, Nate, N0NB -- "The optimist proclaims that we live in the best of all possible worlds. The pessimist fears this is true." Web: https://www.n0nb.us Projects: https://github.com/N0NB GPG fingerprint: 82D6 4F6B 0E67 CD41 F689 BBA6 FB2C 5130 D55A 8819 ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
