I think the fan speed setting is *minimum* speed, not fixed speed. The amp will always speed up the fan from the minimum setting if necessary for self-protection.
/Rick N6XI On Sun, Jan 30, 2022 at 4:42 PM Ed G <ed.n...@gmail.com> wrote: > Thanks Ken. I could easily be mis-remembering! > --Ed, N3CW— > > > Sent from Mail for Windows > > From: Ken K6MR > Sent: Sunday, January 30, 2022 7:28 PM > To: Ed G; elecraft@mailman.qth.net > Subject: Re: [Elecraft] KPA1500 Remote Software Question > > I don't remember the slider ever moving in response to the fan speed while > in Auto mode. The current fan level is noted in the lower info bar by a > number (1 - 5), but that's it. > > Ken K6MR > > > From: elecraft-boun...@mailman.qth.net <elecraft-boun...@mailman.qth.net> > on behalf of Ed G <ed.n...@gmail.com> > Sent: Sunday, January 30, 2022 1:29 PM > To: elecraft@mailman.qth.net <elecraft@mailman.qth.net> > Subject: [Elecraft] KPA1500 Remote Software Question > > Folks, > Using the KPA1500 remote program. There is a slider control for the > fan just below the temp bargraph. I can manually adjust the slider to give > me different fan speeds, so the control is communication with the KPA1500. > I seem to remember when I first installed the remote software that > the slider position responded to the KPA1500’s automatic fan speed. I > could look at the position of the slider and know (while wearing > headphones) what the fan speed was. But that no longer seems to be > working, and the blue slider remains at the far left position even when the > amp fans are running. So I’m not quite sure how this slider is supposed to > work. If I set min fan speed in the KPA1500 menu to “1” the slider position > will move to “1” It just doesn’t move when the fan is set to “auto” and > comes on by itself. > --Ed, N3CW— > > > > > -- > This email has been checked for viruses by Avast antivirus software. > https://www.avast.com/antivirus > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to k...@outlook.com > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to rta...@gmail.com -- -- Rick Tavan Truckee and Saratoga, CA ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com