The 6400 is $2000. Brian KB1VBF Sent from my iPad
> On Mar 5, 2022, at 10:52 AM, Pete Smith N4ZR <pete.n...@gmail.com> wrote: > > Interesting question. The Flex 6700 is close to the top of the list with > some sort of updated hardware, while the 6400 is below the original K3, and > far below the K3 with the new synthesizer(s). The difference between the > 6700 and the K3 with new synth is only 1 dB in terms of narrow spaced > dynamic range. Another data-point in favor of holding on to my K3. > > 73, Pete N4ZR > Check out the new Reverse Beacon Network > web server at <http://beta.reversebeacon.net>. > For spots, please use your favorite > "retail" DX cluster. > >> On 3/5/2022 9:00 AM, Ian Kahn wrote: >> Kurt, >> >> A good starting point would be Rob Sherwood's receiver analysis. It can be >> found at: >> >> http://www.sherweng.com/table.html >> >> I'm not sure/aware of anyone who performed direct transmitter comparisons. >> >> 73 de, >> >> Ian, NV4C >> >>> On Sat, Mar 5, 2022 at 1:19 AM Kurt Pawlikowski <ku...@pinrod.com> wrote: >>> >>> Hi! >>> >>> I was wondering whether there is anyone who has done a side-by-side >>> comparison between the K4 and the Flex 6400 or any other Flex "direct to >>> digital" radio? >>> >>> Background: As it happens, I purchased a 6400, which I received >>> about 9 months ago. I use it with a computer, but I had ordered a >>> Maestro when I ordered the 6400. Unfortunately, the Maestro is still on >>> back-order and will be until some time next year. When I checked with >>> Elecraft, they said the delay time for a K4 was about 6 months (no, I >>> won't hold them to that!). So, I'm wondering if it would be worth >>> jumping to the K4. Mind you, I'm not unhappy with the Flex and, when I >>> ordered it I had considered a K4, but it was outside my budget at that >>> time. I'm rethinking that decision. Also, I've been an Elecraft fan for >>> quite some time. At any rate, I'd like some opinions from experience and >>> the only ones I have seen were written before the K4 was available. So, >>> a little help would be appreciated! Thanks! >>> >>> k WB9FMC >>> >>> ______________________________________________________________ >>> Elecraft mailing list >>> Home: http://mailman.qth.net/mailman/listinfo/elecraft >>> Help: http://mailman.qth.net/mmfaq.htm >>> Post: mailto:Elecraft@mailman.qth.net >>> >>> This list hosted by: http://www.qsl.net >>> Please help support this email list: http://www.qsl.net/donate.html >>> Message delivered to nv4c....@gmail.com >> >> > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to b.den...@comcast.net ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com