Built the ATU, testing it and suddenly no rf output Fiddled around with the main board, removed ATU. No rf, no rf. Then rf. Then dead again. Seems to be an intermittent, but all my solder work is really good, and tested thoroughly during and after construction, (yes toroids are fine). Not my first kit. The processor seemed pretty loose in the socket. I bent the pins outward, reseated it and now it is firmly in there, was not before. Working now when TUN engaged, but I am not confident it won't crap out again. Any ideas? It's out of the case now, l am not too confident about it now. Put it back in, and it crapped out again. This was before I re bent the processor pins. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com