Hi,
in a german QRP forum I found this hint from Peter, DL2FI (SK).
In any case, the PLL calibration must be redone whenever the bottom cover of
the K2 has been opened.
This statement does not correspond to the instructions in the K2 manual
and other contributions here. Also, I can't understand the reason behind
this statement.
Therefore my question, of it is really so that "CAL-PLL" must be done
again after *each opening* of the lower housing cover?
Since Peter is SK, I can unfortunately no longer ask him myself.
73, Wolfgang
DL2KI
--
73 de DL2KI
http://www.dl2ki.de
DOK K08
DL-QRP-AG #3247
G-QRPC #13541
AGCW # 3944
HSC #1970
GnuPG:
Öffentlicher Schlüssel erzeugt am: 2012-10-27
Key-ID: 0xFB3F3B7A
Algorithmus: RSA(4096 Bit)
Fingerprint: 4530 9FCB 9D48 9B50 967C F81C 0EDB 78D9 FB3F 3B7A
Anleitung - E-Mails verschlüsseln - Free Software Foundation
https://emailselfdefense.fsf.org/de/
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com
